by Lotus54 » Sun Feb 19, 2023 7:37 pm
The wiring is 99% done. I have a little cleanup to do on the diagram, but it is close also.
I made a mistake when installing the engine. The skid plate from bolt goes through the case- but you can only put it in when the engine is dropped down. I didn’t notice that when pulling (or forgot).
So had to take the bolts out and drop it a little bit. Didn’t take too long, but dumb anyway.
I put on a new clutch cable, but I didn’t like the way the cable end when into the case. So I made up one out of aluminum rod on the lathe. It came out well and fits well.
- Attachments
-
![7F5CED85-1506-4144-9807-A0AC3925C8A3.jpeg](./download/file.php?id=1087&sid=4a73bafd3639473f61c77b472bd26faf)
- 7F5CED85-1506-4144-9807-A0AC3925C8A3.jpeg (336.15 KiB) Viewed 55681 times
-
![35459129-7C4B-41AD-839E-EE37A3B45C59.jpeg](./download/file.php?id=1085&sid=4a73bafd3639473f61c77b472bd26faf)
- 35459129-7C4B-41AD-839E-EE37A3B45C59.jpeg (204.36 KiB) Viewed 55691 times
-
![B76B859E-7EB7-4EA7-A130-21CC115E7276.jpeg](./download/file.php?id=1084&sid=4a73bafd3639473f61c77b472bd26faf)
- B76B859E-7EB7-4EA7-A130-21CC115E7276.jpeg (208.43 KiB) Viewed 55691 times
1976 OSSA Super Pioneer- 78 Benelli 750 sei,72 250 2C Benelli, 68 Benelli Dynamo trail, 76 OSSA GPII Phantom, Beta XTrainer 300, Lotus Elan S3