Print your own timing wheels
Posted:
Fri Nov 03, 2023 6:13 pmby Vincent
I wanted to share a cool website that lets you print your own timing wheels including positions of intake open and close, exhaust open and close, and top of lobe. Then you just paste it on an old cd smeared with a thin coat of Elmer's glue and you're good to go.
https://www.blocklayer.com/degree-wheel
- IMG_4560.jpeg (150.26 KiB) Viewed 32425 times
Re: Print your own timing wheels
Posted:
Fri Nov 03, 2023 6:15 pmby Lotus54
Hmm, maybe I will 3D print that in colour- then it could be whatever thickness wanted with centre hole size desired. Thanks
Re: Print your own timing wheels
Posted:
Fri Nov 03, 2023 6:21 pmby Vincent
JH probably mills his out of 6061
Re: Print your own timing wheels
Posted:
Sat Nov 04, 2023 1:34 pmby Lotus54
Ha! I would not be surprised.
Re: Print your own timing wheels
Posted:
Sat Nov 04, 2023 9:05 pmby John H
I used this program when degreeing the cams in the Triumph twin engine drag bike. Without a spec sheet for the cams which were stamped 'nitro' I was able to produce a degree wheel from the program.
- IMG_2640 copy.JPG (241.65 KiB) Viewed 32410 times
- IMG_2625 copy.jpg (175.41 KiB) Viewed 32410 times