Print your own timing wheels

Technical discussions/questions, how-to articles, etc.

Print your own timing wheels

Postby Vincent » Fri Nov 03, 2023 6:13 pm

I wanted to share a cool website that lets you print your own timing wheels including positions of intake open and close, exhaust open and close, and top of lobe. Then you just paste it on an old cd smeared with a thin coat of Elmer's glue and you're good to go. https://www.blocklayer.com/degree-wheel
IMG_4560.jpeg
IMG_4560.jpeg (150.26 KiB) Viewed 36372 times
Vincent
 
Posts: 34
Joined: Tue Apr 26, 2022 4:48 pm

Re: Print your own timing wheels

Postby Lotus54 » Fri Nov 03, 2023 6:15 pm

Hmm, maybe I will 3D print that in colour- then it could be whatever thickness wanted with centre hole size desired. Thanks
1976 OSSA Super Pioneer- 78 Benelli 750 sei,72 250 2C Benelli, 68 Benelli Dynamo trail, 76 OSSA GPII Phantom, Beta XTrainer 300, Lotus Elan S3
User avatar
Lotus54
 
Posts: 596
Images: 0
Joined: Tue Jun 12, 2012 9:13 pm

Re: Print your own timing wheels

Postby Vincent » Fri Nov 03, 2023 6:21 pm

JH probably mills his out of 6061
Vincent
 
Posts: 34
Joined: Tue Apr 26, 2022 4:48 pm

Re: Print your own timing wheels

Postby Lotus54 » Sat Nov 04, 2023 1:34 pm

Ha! I would not be surprised.
1976 OSSA Super Pioneer- 78 Benelli 750 sei,72 250 2C Benelli, 68 Benelli Dynamo trail, 76 OSSA GPII Phantom, Beta XTrainer 300, Lotus Elan S3
User avatar
Lotus54
 
Posts: 596
Images: 0
Joined: Tue Jun 12, 2012 9:13 pm

Re: Print your own timing wheels

Postby John H » Sat Nov 04, 2023 9:05 pm

I used this program when degreeing the cams in the Triumph twin engine drag bike. Without a spec sheet for the cams which were stamped 'nitro' I was able to produce a degree wheel from the program.
IMG_2640 copy.JPG
IMG_2640 copy.JPG (241.65 KiB) Viewed 36357 times
IMG_2625 copy.jpg
IMG_2625 copy.jpg (175.41 KiB) Viewed 36357 times
[i][color=#4040BF]John[/color][/i]
John H
 
Posts: 1078
Images: 8
Joined: Wed Jun 13, 2012 10:19 am
Location: Northwest


Return to Tech

Who is online

Users browsing this forum: No registered users and 2 guests