Page 19 of 20

Re: Double Trouble

PostPosted: Sun Nov 21, 2021 5:02 pm
by John H
Yeh, we can have a startup party. The WVM bike show is in April so we will plan one after that.

Re: Double Trouble

PostPosted: Sun Nov 21, 2021 5:14 pm
by Lotus54
John H wrote:Yeh, we can have a startup party. The WVM bike show is in April so we will plan one after that.


That would be pretty cool.
I hope to have the sei painted by then, and some other fine tuning done. Took it out saturday, once up to temp it is running really well.

Re: Double Trouble

PostPosted: Tue Nov 23, 2021 8:13 pm
by John H
The 2 torque plates are different, in part due to wear and tear and probably different crankcases.
So each plate is fit individually. I didn't have any steel handy so made them from stainless steel.
IMG_4923.JPG
IMG_4923.JPG (247.92 KiB) Viewed 29195 times


The pieces need to be in place for welding so will move the unit out to the welding area tomorrow.
IMG_4926.JPG
IMG_4926.JPG (289.66 KiB) Viewed 29195 times

IMG_4928.JPG
IMG_4928.JPG (184.85 KiB) Viewed 29168 times

Re: Double Trouble

PostPosted: Sat Nov 27, 2021 9:07 pm
by John H
When mounting the injectors I noticed a seriously warped manifold. Now I remember there was an extra thick gasket here when I disassembled the motors. I had a choice of pulling the head and and milling the surface true or using a vixen file. Two hours later I had it filed flat.
IMG_4933.JPG
IMG_4933.JPG (323.41 KiB) Viewed 29168 times
IMG_4934.JPG
IMG_4934.JPG (357.76 KiB) Viewed 29168 times
IMG_4935.JPG
IMG_4935.JPG (266.21 KiB) Viewed 29168 times

Re: Double Trouble

PostPosted: Fri Dec 03, 2021 10:17 pm
by John H
Double checked the oil and fuel tanks again before buffing them to the final finish. It's a dirty job for sure.
The fuel tanks will have Triumph logos on them.
IMG_4946.JPG
IMG_4946.JPG (351.23 KiB) Viewed 29125 times

Re: Double Trouble

PostPosted: Thu Dec 09, 2021 10:17 am
by John H
The Double, with the exception of the exhaust pipes, is finished. I haven't decided on chrome or ceramic for the finish.
On to the next project.
IMG_4958 copy.JPG
IMG_4958 copy.JPG (103.79 KiB) Viewed 29087 times

Re: Double Trouble

PostPosted: Thu Dec 09, 2021 10:34 am
by Lotus54
Looks great!

Re: Double Trouble

PostPosted: Fri Dec 10, 2021 11:44 am
by ClineDesign
It looks great John, thanks for taking us all along on the road to recovery!

If you need a rest you can work on mine next.

IMG_6018.jpg
IMG_6018.jpg (278.72 KiB) Viewed 29077 times

Re: Double Trouble

PostPosted: Fri Dec 10, 2021 7:45 pm
by John H
Oh Yeh, I think it needs a supercharger on it. Merry Christmas

Re: Double Trouble

PostPosted: Mon Dec 27, 2021 12:02 pm
by John H
One project done, time for the next one. My Shadow has been in a wood box for close to 35 years waiting to be restored. Well, it's time to get it done. I broke it down back then but life got in the way so it was sealed in a box until now. I'm looking forward to the project. The R60/2 will be sold to help make it possible.
Maybe I'll do a build thread if anyone is interested.