Metal fabricator?
Posted: Fri May 10, 2013 9:09 amNot MC related...but can anyone suggest a local metal fabricator that could whip up one of the following at a reasonable price? The attached pics show an example of what needs to be done.
Nothing fancy, but I don't have the equipment or skill. My Kubota has a quick hitch installed on the lower arms which extends all the implements out a few inches. On many of these implements, functionality is significantly reduced due to the reduced range for the top link hydraulic cylinder. This adaptor solves the problem.
And, iffin' there's anybody reading here who wants to do a little swap...I'd be more than happy to load up the Kubota and come mow a field, or till up a nice spring garden plot in exchange...
Nothing fancy, but I don't have the equipment or skill. My Kubota has a quick hitch installed on the lower arms which extends all the implements out a few inches. On many of these implements, functionality is significantly reduced due to the reduced range for the top link hydraulic cylinder. This adaptor solves the problem.
And, iffin' there's anybody reading here who wants to do a little swap...I'd be more than happy to load up the Kubota and come mow a field, or till up a nice spring garden plot in exchange...