Metal fabricator?

If in doubt, or it doesn't seem to fit elsewhere - put it here.

Metal fabricator?

Postby Da Nag » Fri May 10, 2013 9:09 am

Not MC related...but can anyone suggest a local metal fabricator that could whip up one of the following at a reasonable price? The attached pics show an example of what needs to be done.

Nothing fancy, but I don't have the equipment or skill. My Kubota has a quick hitch installed on the lower arms which extends all the implements out a few inches. On many of these implements, functionality is significantly reduced due to the reduced range for the top link hydraulic cylinder. This adaptor solves the problem.

And, iffin' there's anybody reading here who wants to do a little swap...I'd be more than happy to load up the Kubota and come mow a field, or till up a nice spring garden plot in exchange... :D
Attachments
extender 003.JPG
extender 003.JPG (250.12 KiB) Viewed 8972 times
extender 002.JPG
extender 002.JPG (254.45 KiB) Viewed 8972 times
extender 001.JPG
extender 001.JPG (259.85 KiB) Viewed 8972 times
User avatar
Da Nag
 
Posts: 74
Images: 4
Joined: Tue Jun 05, 2012 9:29 am
Location: Freshwater Bay

Re: Metal fabricator?

Postby DougErickson » Fri May 10, 2013 5:01 pm

come talk to us at Lincoln Welding, It looks easy Doug
DougErickson
 
Posts: 95
Joined: Tue Jun 12, 2012 10:40 pm

Re: Metal fabricator?

Postby John H » Fri May 10, 2013 7:17 pm

Do you have a rototiller on that tractor? I'd be glad to trade for some tilling.
[i][color=#4040BF]John[/color][/i]
John H
 
Posts: 1068
Images: 8
Joined: Wed Jun 13, 2012 10:19 am
Location: Northwest

Re: Metal fabricator?

Postby John H » Sat May 18, 2013 7:57 am

Bill,
I sent you a pm. Did you get it?
John
[i][color=#4040BF]John[/color][/i]
John H
 
Posts: 1068
Images: 8
Joined: Wed Jun 13, 2012 10:19 am
Location: Northwest


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 36 guests

cron