Knurling takes some practice to get a perfect pattern. What brand is the throttle?

The support is now welded in place. The spindle still fits good so no distortion.

These sand cast cases are quite porous and contain a fair amount of silica sand. The cases have spent several hours in the old electric oven baking out the oil. After welding the spindle support the cases will get baked again to get the last bit of oil cooked out of them. Next will be coating the in...

That will be a sweet little rider. Perfect commuter size too.

The Vincent motor had a weakness where the gearbox cam plate spindle is located causing them to break for different reasons. The fix which I have done to four other motors beefs up the casting giving the spindle more support. cam plate spindle.jpg Cam plate spindle1.jpg This will require clamping th...

Maybe we can straighten the bent part here on the press. Have you seen the new Benelli V-4 prototype?

I stand corrected, It's probably a 19" Matador front wheel not a pursang. The 370 Pursang forks are different as well. And the tank and the seat and the shocks!! May be too expensive to restore to original.

That's a real gem.

It's the correct wheel, not sure what the plan was with the big knobby.